AURTTK001 Maintain Equipment In Automotive

AURTTK001 Use And Maintain Equipment In Automotive:

For solution: +610482078788

+61482073403

+61482072848

Assessment 1 – Questioning – Written Assessment
Student Name		Student ID Number
Unit Start Date		Unit End Date
Assessment Due Date		Date Submitted
This cover sheet is to be completed by the student and assessor and used as a record to determine student competency in this assessment task
The assessment process and tasks were fully explained.	Yes/No
I am aware of which evidence will be collected and how.	Yes/No
I am aware of my right to appeal an assessment decision.	Yes/No
I am aware that I can locate The RTO Complaints and Appeals Policy and Procedure on their website at https://woodstock.sa.edu.au/	Yes/No
I have discussed any additional educational support or reasonable adjustments I require in order to undertake this assessment with the Student Support Services Officer and Trainer / Assessor, (if applicable). e.g. Student Handbook and https://woodstock.sa.edu.au/	Yes/No
I have access to all required resources?	Yes/No
Cheating & Plagiarism Declaration
Student Declaration: In accordance with The RTO Plagiarism Policy, I hereby acknowledge by signing this declaration that I have not cheated or plagiarised any work regarding the assessment tasks undertaken in this unit of competency except where the work has been correctly acknowledged. NOTE: Student must sign this prior to submitting their assessments to the assessor
Signature		Date:	/             / 20

Assessment Results	Satisfactory	or	Not Yet Satisfactory
	(Please circle the assessment result for this task)
Feedback to Student – Please provide general feedback on the Student’s performance
Student Declaration: – I verify that the work completed is my own and that I was adequately informed of the assessment process prior to commencing this assessment task.	Assessor Declaration: – I verify that I have adequately explained and negotiated the assessment tasks with the student prior to commencing assessment.
Student Name:	Assessor’s Name:
Student Signature	Date	Assessor Signature	Date

	AURTTK001 Use and maintain measuring equipment in an automotive workplace
Student Guide for Written Knowledge Assessment
Overview of Assessment	This is a written assessment task you will be assess on your knowledge of using and maintaining measuring equipment in an automotive workplace. The topics that will be covered in the assessment are: Select and use measuring equipmentService, maintain and store workplace measuring equipment This assessment will ensure that the elements, performance criteria, performance evidence and knowledge evidence required, and conditions are adhered to demonstrate competency in this unit assessment task. Read the assessment carefully before commencing.Your Assessor will use the assessment criteria in this document and will provide feedback / comment.You must answer all the questions in the assessment tasks in your own words and own handwriting.This is an “Open Book” assessment, and students can use the resources listed in the “Resources Required” section below.
Task/s to be assessed	To complete this written assessment, you will need to answer the 49 questions comprising of Multiple Choice, True and False, Fill-in the Gap and Short Answer questions.
Time allowed	On average, the Assessment should take 2 – 4 hours to complete.
Location	This theory assessment will be completed in a classroom under the supervision of a trainer/assessor.
Decision making rules	To receive a ‘satisfactory’ outcome for this assessment students MUST successfully answer all questions. If a student achieves less than 100%, they can reattempt the assessment after further study has taken place. Students who cannot achieve a minimum of 100% you will not have satisfactorily completed this assessment Your assessor will be looking for the following in this assessment task: – Work health and safety (WHS) and occupational health and safety (OHS) requirements relating to using and maintaining measuring equipment, including safe operating procedures for specific measuring equipmentTypes, uses, limitations and operation of measuring equipment specified in the performance evidence, including:Using metric and imperial units of measurementUsing analogue and digital measuring equipmentProcedures for selecting measuring equipment suitable to job requirementsIdentification and tagging procedures for faulty measuring equipmentBasic maintenance, adjustment, calibration and storage procedures for measuring equipment.
Assessment conditions	Assessors MUST satisfy NVR/AQTF assessor requirements. Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting. Assessment MUST include direct observation of tasks. Where assessment of competency includes third-party evidence, individuals MUST provide evidence that links them to the measuring equipment that they have used and maintained, e.g. repair orders with calculated tolerances. Assessors MUST verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

	AURTTK001 Use and maintain measuring equipment in an automotive workplace
	The following resources MUST be made available: Automotive repair workplace or simulated workplaceWorkplace instructionsMeasuring equipment specified in the performance evidence requiring maintenanceVehicles, components or materials that require the use of automotive measuring equipmentMaterial relevant to maintaining automotive measuring equipment, including:Measuring equipment operating instructions or manualsRelevant measuring equipment and adjusting or calibration equipmentTagging material.
Resources required	Learning Resources available to students include: Automotive Technology (A System Approach)Websites –http://www.wonkeedonkeetools.co.uk/micrometers/how-do-you-look-after-a- micrometer/https://megadepot.com/resource/how-to-use-micrometershttp://www.wonkeedonkeetools.co.uk/calipers/how-do-you-look-after-a-vernier- caliper/http://www.wonkeedonkeetools.co.uk/micrometers/what-is-a-digital-micrometerhttp://www.wonkeedonkeetools.co.uk/micrometers/how-does-the-scale-of-an- imperial-micrometer-workhttp://www.aa1car.com/library/tstemp.htmTrainer Handouts
Results/Re- assessment	The Assessor will grade the assessment and record the result on the front page of this document (S) – Satisfactory if all observable behaviours are correct and (NS) not satisfactory if any areas are left incorrectFeedback will be provided on either resultWhere a student receives a ‘NS – Not Satisfactory’ result, the assessor will discuss the area of the non-compliant observable behaviour and an opportunity given for re- assessment. This may be through direct observation or a different method of assessment e.g. verbal/oral questioning, problem solving exercise.If the outcome is again not satisfactory the student result will be deemed (NYC) not yet competent. Additional feedback will be given, and a time agreed upon for further assessment after additional training and skills practice has taken place, this information will be recorded, dated and signed in the re-assessment area on the last page of this documentWhere all the assessment tasks have been graded (S) Satisfactory, the student will be deemed C – Competent for the practical component and the result recorded and signed in the area indicated on the last page of this document
Reasonable Adjustment	If the participant is unable to undertake the written assessment as designed, an interview (verbal questioning) may be used as an alternate approach.

	AURTTK001 Use and maintain measuring equipment in an automotive workplace
Assessment 1 – Questioning
Written Assessment

1. Identify five (5) important items of personal safety when using and maintaining measuring tools and equipment in an automotive workplace?

1

2

3

4

5

• What precautions should be taken when using a tyre pressure gauges with compressed air?

• What are Outside and inside micrometers used for?

• Name the fourteenth [14] parts of an inside and outside micrometers below.

• Read the metric micrometer at each stage below and workout the measurement.

Total:

Multiple Choice question. Select the correct answer.

• Each number on the sleeve of a metric micrometer represents               mm?

A. .05.

B. .005.

• 5.
  • None of these answers are correct.

Multiple Choice question. Select the correct answer.

• When using an inside micrometer to measure a cylinder bore, what are the two parts that come in contact with the bore?

1. Spindle and thimble.
2. Anvil and thimble.
3. Needle and thimble.
4. Anvil and spindle/rod.

Multiple Choice question. Select the correct answer.

• Which statement is not correct?

1. Micrometers should be handled carefully.
2. Micrometers should be left with a gap when not in use.
3. Micrometers should be closed tightly.
4. Micrometers need to be checked for accuracy.

• Explain the operation of the outside micrometer when measuring an object?

1. Where would you use an inside micrometer?

1. Explain how to use an inside micrometer.

Multiple Choice question. Select the correct answer.

1. What are the advantages of using a digital micrometer?

1. Measurements can be taken in both metric and imperial units.
2. Digital micrometers are able to take extremely accurate measurements.
3. The reading is instant and avoids user error by eliminating the need to interpret the scales.
4. All answers are correct.

Multiple Choice question. Select the correct answer.

1. Read the imperial micrometer below and workout the measurement. The graduations on the sleeve each represent 0.025 inch.

A. 0.0212 inch. B. 0.0775 inch. C. 0.5280 inch. D. None of these answers are correct.

1. What four (4) maintenance activities should be carried out on a micrometer to ensure accuracy?

1
2
3
4

1. Name the ten [10] parts of a Vernier caliper below.

1. What type of measurements can a Vernier caliper make?

1. How do you read a Vernier caliper?

Multiple Choice question. Select the correct answer.

1. Read the two (2) Vernier caliper below and workout the measurement.

1. 0.100 inch.
2. 0.005 inch.
3. 1.105 inch.
4. 0.105 inch.

1. 4.000 inch.
2. 0.275 inch.
3. 4.287 inch.
4. 1.012 inch.

1. Name the different types of Vernier calipers below.

• What four (4) maintenance activities should be carried out on a Vernier caliper to ensure accuracy?

1
2
3
4

• What is the Dial indicator used for?

• Identify some common uses of a Dial indicator?

• How is a Dial indicator used?

• What are steel rulers used for?

Multiple Choice question. Select the correct answer.

• Steel rulers are usually             long?

1. 150mm to 300mm.
2. 50mm to 500mm.
3. 0mm to 1000mm.
4. None of these answers are correct.

• What can a square be used?

• How is a square used?

Multiple Choice question. Select the correct answer.

• A straightedge is:

1. A wooden ruler used with light.
2. A special tool requiring the use of a feeler gauge for accuracy.
3. Another name for a surface plate.
4. the perimeter of a picture frame.

• What is a straightedge used for?

Multiple Choice question. Select the correct answer.

• A straightedge and feeler gauge are used to measure?

1. Clearances.
2. Warpage.
3. Runout.
4. Endplay.

• What are feeler gauges?

• Where can you use feeler gauges to measure on an engine?

• Where would you used round wire feeler gauges?

• Name the following pressure gauges?

AURTTK001 Use and maintain measuring equipment in an automotive workplace

• What is a tyre pressure gauge used for?

• Explain how to use a tyre pressure gauge?

Multiple Choice question. Select the correct answer.

• A compression gauge is used to measure.

1. Compression of the engine cylinders.
2. Pressure of the transmission hydraulic circuit.
3. The pressure of the fuel injection system.
4. All answers are correct.

• Outline briefly how a compression gauge is used?

• Why would you use an oil pressure gauge to check the oil pressure of an engine?

• Where is the oil pressure gauge fitted to the engine?

• What components does a fuel pressure gauge measure on the fuel injection system?

• How is a pressure tester used to check a cooling system?

• What does a cylinder leak tester test for?

• How does a cylinder leak tester operate?

Multiple Choice question. Select the correct answer.

• An infrared, digital or dial type thermometer is often used to measure?

1. Air temperature at the vent outlets.
2. Coolant temperature.
3. Catalytic converter temperature.
4. All answers are correct.

Multiple Choice question. Select the correct answer.

• When is a manifold gauge set used?

1. Discharging the A/C gas system.
2. Charging the A/C gas system.
3. Evacuating the A/C gas system.
4. All answers are correct.

• Describe the four (4) steps to safety select and use measuring tools in the automotive workplace?

1
2
3
4

• What is Lockout/Tagout?

• What care is needed with precision measuring equipment?

Visit:https://auspali.info/

Also visit:https://www.notesnepal.com/archives/767

For solution: +610482078788

+61482073403

+61482072848

For solution:

WhatsApp

+610482078788

+61482073403

+61482072848

[email protected]